San Martin SN026-G "Square round"

Today I would like to share with you an introduction to the niche style watch SN0026 (named: Square round).

This watch has actually been produced at the beginning of the year (it has been half a year since production), because the case craftsmanship is too difficult, and the factory is slow when it is not busy. Slow work can guarantee a good job, so the construction period is very long, but it is also a particularly anticipated one this year.

The design is to start with the case, try to combine good craftsmanship and design, multi-faceted threading, polishing and sanding interspersed combination.

This watch case is designed with a three-piece structure, with the upper bezel, the middle case, and the lower bottom cover. The three-layer structure is multi-faceted design, with 9 faces on the bezel, 23 faces on the case, and 9 faces on the bottom cover.

The front of the bezel is sandblasted, the four bevels are polished, the four sides are sandy, and the four feet are decorated with nails; the case is straightened sand, the ears of the case are sanded with sun sand, the ears are sandy, and the ears connect the ears.

Surface polishing process; big body straightening sand, small smooth edge polishing process on the top and bottom; bottom cover is similar to the bezel, flat straightening sand, four bevel polishing, four side surface sand, the same four corners are fixed with screws Tighten the bottom cover.

San Martin SN026-G

Watch Specification:

Model: SN026-G
Movement: PT5000
Case: Material - 316L Stainless Steel
Glass: Sapphire Crystal Glass, AR Coating
Dial Color:  Sunray Dial, Blue/Silver/Green/Gun
Hands: GS Crafts Hands, Luminous Coating
Luminous: BGW-9 Blue Light
Crown: Screw-down Crown, With 3D San Martin Hexagon Logo
Case Back: 316L Stainless Steel, Screw Case Back
Strap: 9 Links 316L Solid Stainless Steel Bracelet
Clasp: Folding Clasp With Safety,With San Martin Hexagon Logo
Water Resistant: 10Bar=100 meters

Watch Dimension:

29.5 mm in diameter
Lug to Lug 47 mm
Thickness 15mm
Band width 20 mm
Weight: about 178g

The case has been modeled, and I feel very satisfied. Regardless of the proportion of the design, or the polished appearance, it has reached my expectations.

Multi-process effects are selected on the surface, the whole sun pattern is made to echo the sun pattern effect of the lugs, the circle of the hour markers is made of CD pattern, the hour markers are molded into metal R-nails, and the interior is filled with luminous to ensure three-dimensional effect and sufficient luminous to ensure luminescence brightness.

The hands of the watch are sword-shaped hands, with the straight sand in the middle of the watch case craftsmanship, with flowers on both sides, the shape of the second hand long gun, and a flat seconds cap in the middle.

The watchband is made of 9-bead solid steel belt, and each segment is polished separately. In the middle of the process, 7-beads are polished, 4-beads are polished, and 3-beads are brushed, which echoes the 7-layer layered grinding process on the side of the case. The beads on both sides are made of sand-drawing process, and the cnc engraved small bevel is polished and polished, and it is matched with our own designed bevel polished turtle back buckle.

This watch refers to the styles of some foreign niche brands, and at the same time, it also adds a lot of details and craftsmanship, and it has been revised many times over and over again. Especially for the combination of craftsmanship, a semi-original style with great care, I hope everyone will like it too.

Latest posts