Today, I would like to share with you the new SN0045 watch, which is cute and somewhat rugged.
The SN0045 style can be regarded as our own original style design. The style continues in the Middle Ages. There is no specific reference to a certain style of the big name. In our own design, we first design the case, produce a good data map, and then draw a flat color map based on the data map. Hands, dials, straps, etc.
Watch model introduction: The diameter of the case is 40.5mm, and the length of the case is 43mm, which guarantees the comfort of wearing (watchers with small wrists don't have to worry about not sticking to the wrist), the thickness is 13.5 mm, and the tape weight is about 115g (small). ) Because the overall case is 13.5mm thick, in order to ensure a coordinated ratio and good visual effects, the body part has two layers. The upper layer 39mm is gradually widened to 40.5mm, while the lower layer 40.5mm is gradually narrowed to 37.5mm, and the body is 6.6mm. The width is divided into 4.2mm and 2.4mm, which fully guarantees the coordination of the side proportions. The diameter of the bezel is 40mm, and the upper layer of the case is 39mm, ensuring that the rotating bezel can firmly grasp the ring. The side teeth are divided into 4 levels. There is a small smooth edge on the top (corresponding to the timing ring). Make heaven and earth sand, grind teeth, and intersperse craftsmanship to ensure clear lines. The earplugs, ear soles and the body are clearly connected. Straighten the sand at the bottom of the shell, and straighten the side of the bottom cover to connect with the hiding place to achieve a flush effect. The bottom cover and bar have a 3D shark logo effect.
There is a small smooth edge on the top (corresponding to the timing ring). Make heaven and earth sand, grind teeth, and intersperse craftsmanship to ensure clear lines. The earplugs, ear soles and the body are clearly connected. Straighten the sand at the bottom of the shell, and straighten the side of the bottom cover to connect with the hiding place to achieve a flush effect. The bottom cover and bar have a 3D shark logo effect.
Both the hands and the dial choose a classic collocation. The large MM model has a three-sided hand, a middle Lassa, two-sided floral craftsmanship, and the second hand is covered with a flat seconds cap; the 6105 abalone dial has our hexagonal metal logo at 12 o'clock, and a metal square. Nail the time scale.
Watch Specification:
Case diameter:40.5 mm (without crown)
Case length: 43mm( lug to lug)
Case thickness: 13.5mm
Lug width 20mm
